Skip to content

BMS

Building management system

Bring building systems onto the same model as energy.

Bring BACnet points from HVAC, lighting and meters into the same model as chargers, solar and storage, so one plan sees the whole building.

Get Started

01 Overview

With Voltra you can bring BACnet points from HVAC, lighting and meters into the same model as chargers, solar and storage, so one plan sees the whole building.

Who runs it

  • Offices
  • Retail
  • Hotels
  • Campuses

Used for

  • Point discovery
  • Unified alarms
  • Setpoint schedules
  • Comfort & energy
  • Fault detection
  • Tenant metering

02 Architecture

The modular energy stack

BMS is one module on a stack you can extend.

Products on top, Fabric in the middle, devices and data sources at the edge. Every product runs on the same Fabric, so a second product works from the devices and site model the first one already connected.

  1. /products

  2. /fabric

    Voltra Fabric

    The same platform under every product

    • Connect

      Devices over nine protocols, through versioned device profiles.

    • Model

      Every device and system as one vendor-agnostic graph.

    • Configure

      Devices made to work together from the model.

    • Maintain

      Connections and the model kept current as firmware and sites change.

  3. /edge

    Devices and data sources

    Connected where they are, over the protocols and formats they already use.

    • BACnet/IP
    • Modbus
    • MQTT
    • SNMP
    • OCPP
    • IEEE 2030.5

03 Features

BMS, feature by feature.

BACnet discovery

Find devices and points on the building network automatically.

Points in the device model

Map HVAC, lighting and metering points into the same model as energy assets.

One alarm list

Building and energy alarms in one place, with the same rules.

Schedules & setpoints

Plan setpoints alongside charging and storage schedules.

Comfort & energy reports

Comfort and consumption side by side for every zone.

Works beside your BMS

Read alongside existing controllers without replacing them.

Native integrations with the hardware you already use.

Voltra talks to devices over the protocols they already speak, so you keep the equipment you have. Each vendor below is mapped to one device model, so a new site comes online without custom integration work.

  • Bosch
  • Honeywell
  • Siemens
  • Schneider Electric
  • Carrier
  • Trane
  • Daikin
  • ecobee
  • Google Nest
  • Legrand

Voltra

Voltra Edge Gateway

On-site runtime that connects local devices and keeps running when the internet drops.

Partner hardware

Site controller

DIN-rail PLC for on-site load management and local control loops.

Partner hardware

Revenue-grade meters

Sub-metering for panels, feeders and chargers, pre-mapped to the device model.

04 Connectors

Speaks the protocols already on site.

BACnet/IP

Building systems

Modbus

TCP & RTU

MQTT

Sensors & brokers

SNMP

Network & UPS

OCPP

EV chargers

IEEE 2030.5

DER & utilities

05 Integrations

Integrations across your stack.

Send Voltra data to the tools your team already runs, and act on it from them.

  • IBM Maximo
  • ServiceNow
  • Power BI
  • Snowflake
  • Tableau
  • Slack

06 Related solutions

Runs on the same platform.

Run the building and its energy from one model. Tell us about your building portfolio.